For more information on Aluma-Foil Products, select from the following list of Adobe Acrobat PDF documents:

Don't Have Adobe Reader, Click Here!   

Hot Box Results

Testimonials

Aluma-Foil HD New Construction Inst. Pg. 1	Aluma-Foil HD New Construction Inst. Pg. 2	Aluma-Foil SuperPlus Installation Instructions
Crawl Space Installation Instructions   Vaulted/Cathedral Ceiling Instructions
Note: In all installations at least one foil surface of the radiant barrier must face an airspace of 3/4" or more, regardless of the installation type. Under no circumstances may any AFS products be used as a roofing underlayment in place of felt. These products are not approved for this type of installation and would not be effective as a radiant barrier due to being in direct contact with other materials on both sides of the product.

You tell us what you are building, the climate zone your building in,
and we will suggest the RB system and product that will provide the most
comfort and energy savings at the least amount of cost and effort.

Example: It is less costly to install Aluma-Foil HD on your own OSB or plywood than it is to buy a pre-foiled OSB or plywood panel.  Not to mention the fact that the gable ends, on a gable ended home, need to to be covered with radiant barrier as well.

Product Warranty and Quality

Aluma-Foil products are made from only the highest quality aluminum foils and substrates, All AFS products are Flame Spread tested by U.L. (Underwriters Laboratories) and have a class "A" flame spread of 25 or less. AFS warrants all of our products for a period of one year, from the date of sale, against any defects in material and workmanship. AFS does not warrant any of our products that are installed improperly in a system, or conditions, that could result in a system or product failure. An example of this would be the installation of a vapor retarder in a wet roof assembly.